Solid Stainless Steel - Alignment Shims

Pre-cut shims for fast, simple and precise machine alignment

Specs:

• Available in 6 different sizes and 11 thicknesses
• Packed in sets of 10 shims
• High-quality, non-corroding material
• The shim's thickness is etched on each shim
• Suitable for re-use
• 9 standard combinations in handy carrying cases

Advantages:

• The right size available for immediate use
• The shims have been smoothed and have no burrs
• Precise machine alignment helps you get the best machine performance
• Stock control is now simpler and easier to verify
• Now also available in 2 and 3 mm thickness

Case	ABCD 10/9	ABC 10/9	ABC 10/10	ABC 20/10	AB 10/9
Thickness	TB-SHB020019	TB-SHB 020110	TB-SHB020100	TB-SHB020130	TB-SHB020210
0.05	10	10	10	20	10
0.1	10	10	10	20	10
0.2	10	10	10	20	10
0.25	10	10	10	20	10
0.4	10	10	10	20	10
0.5	10	10	10	20	10
0.7	10	10	10	20	10
1	10	10	10	20	10
2	10	10	5	5	10
3	-	-	5	5	-
Total	360	270	270	510	180

Catalog Number	Pkg.	A mm	B mm	C mm	Size mm	Bolt Size
Minimum
TB-SHB035005MN	10	35	30	9	0. 05	M8
TB-SHB035010MP	10	35	30	9	0.1	M8
TB-SHB035020MR	10	35	30	9	0.2	M8
TB-SHB035025MS	10	35	30	9	0.25	M8
TB-SHB035040MT	10	35	30	9	0.4	M8
TB-SHB035050MU	10	35	30	9	0.5	M8
TB-SHB035070MV	10	35	30	9	0.7	M8
TB-SH B035100MW	10	35	30	9	1	M8
Case A
TB-SH B0500025AK	10	50	50	13	0.025	M12
TB-SHB050005AN	10	50	50	13	0.05	M12
TB-SHB050010AP	10	50	50	13	0.1	M12
TB-SHB050020AR	10	50	50	13	0.2	M12
TB-SHB050025AS	10	50	50	13	0.25	M12
TB-SHB050040AT	10	50	50	13	0.4	M12
TB-SHB050050AU	10	50	50	13	0.5	M12
TB-SHB050070AV	10	50	50	13	0.7	M12
TB-SHB050100AW	10	50	50	13	1	M12
TB-SHB050200AX	10	50	50	13	2	M12
TB-SHB050300AY	10	50	50	13	3	M12
Case B
TB-SHB0750025BK	10	75	75	21	0.025	M20
TB-SHB075005BN	10	75	75	21	0.05	M20
TB-SHB075010BP	10	75	75	21	0.1	M20
TB-SHB075020BR	10	75	75	21	0.2	M20
TB-SHB075025BS	10	75	75	21	0.25	M20
TB-SHB075040BT	10	75	75	21	0.4	M20
TB-SHB075050BU	10	75	75	21	0.5	M20
TB-SHB075070BV	10	75	75	21	0.7	M20
TB-SHB075100BW	10	75	75	21	1	M20
TB-SHB075200BX	10	75	75	21	2	M20
TB-SHB075300BY	10	75	75	21	3	M20
Case C
TB-SHB1000025CK	10	100	100	32	0.025	M30
TB-SHB100005CN	10	100	100	32	0.05	M30
TB-SHB100010CP	10	100	100	32	0.1	M30
TB-SHB100020CR	10	100	100	32	0.2	M30
TB-SHB100025CS	10	100	100	32	0.25	M30
TB-SHB100040CT	10	100	100	32	0.4	M30
TB-SHB100050CU	10	100	100	32	0.5	M30
TB-SHB100070CV	10	100	100	32	0.7	M30
TB-SHB100100CW	10	100	100	32	1	M30
TB-SHB100200CX	10	100	100	32	2	M30
TB-SH B100300CY	10	100	100	32	3	M30
Case D
TB-SHB1250025DK	10	125	125	45	0.025	M42
TB-SHB125005DN	10	125	125	45	0.05	M42
TB-SHB125010DP	10	125	125	45	0.1	M42
TB-SHB125020DR	10	125	125	45	0.2	M42
TB-SHB125025DS	10	125	125	45	0.25	M42
TB-SHB125040DT	10	125	125	45	0.4	M42
TB-SHB125050DU	10	125	125	45	0.5	M42
TB-SHB125070DV	10	125	125	45	0.7	M42
TB-SHB125100DW	10	125	125	45	1	M42
TB-SHB125200DX	10	125	125	45	2	M42
TB-SHB125300DY	10	125	125	45	3	M42
Case E
TB-SHB200005EN	10	200	200	55	0.05	M52
TB-SHB200010EP	10	200	200	55	0.1	M52
TB-SHB200020ER	10	200	200	55	0.2	M52
TB-SHB200025ES	10	200	200	55	0.25	M52
TB-SHB200040ET	10	200	200	55	0.4	M52
TB-SHB200050EU	10	200	200	55	0.5	M52
TB-SHB200070EV	10	200	200	55	0.7	M52
TB-SHB200100EW	10	200	200	55	1	M52
TB-SHB200200EX	10	200	200	55	2	M52
TB-SHB200300EY	10	200	200	55	3	M52

PEEL-OFF (HARD BRASS SHIMS) MS-63

• The peel-off shims are 1 mm thick and are available in 5 sizes, consisting of 12 peel-off layers (8 x 0.1 mm and 4 x 0.05 mm).
• By combining the 0.1 and 0.05 mm shims, the right thickness can always be obtained.

Catalog Number	Package	Size	Bolt Size
TB-PS8125005	10	35 x 35 mm	M10
TB-PS812502	10	50 x 50 mm	M14
TB-PTB-PS8125035	10	75 x 75 mm	M16
TB-PS812504	10	100 x 100 mm	M24
TB-PS8125045	10	125 x 125 mm	M32